Skip to main content
All CollectionsIoT DevicesRaw
How do I install a Raw device?
How do I install a Raw device?

Do you need to install a Raw device? Follow these steps to ensure optimal conditions for the device.

Updated today

Visibility

Mount the Trackunit Raw with the device's serial number facing away from the machine or vehicle. The device's serial and GSM number is also found on the box label.

Signal

Install the Raw device outdoors for optimal GPS and GSM/UMTS signal.

Position

For optimal conditions mount the device horizontally or vertically and avoid mounting the device directly under a layer of metal or next to wiring. TU600 devices must be installed at a minimum distance of 20 cm/7.87 inches from the operator of the machine or vehicle.

Wiring

Make sure that the wires are connected in accordance with the installation documentation. Consult the machine or vehicle guidelines for correct wiring. If possible, connect the Raw device to the machine's CAN bus to get full machine insight.

Installation Example with Access Control


Verify your Trackunit

Once the installation process is complete, sign in to verify.trackunit.com to review the installation and set up the device.


💡 Tip:

Need more help? Get support from the Trackunit Community
Find answers and get help from Trackunit Tech Support and Community Experts


Did this answer your question?