You can install a Kin tag using either glue, screws, or zip ties:
Glue mounting recommendation: Single component MS-Polymer adhesive (windshield adhesive)
Note: Clean surface with Isopropyl or Acetone before mounting.
Screw mounting recommendation: Pan head tapping screw BN 13274 Art-Nr.3060133.
Zip Ties mounting for cable or handtools: Stainless steel or strong nylon zip ties – width 4.8mm.
You can install a Kin tag on basically any type of asset you want to keep track of. Others are getting great value out of installing Kin tags on buckets, rammers, vibrator plates, hammers, Auger Bits, light towers, pallet trucks, grabs and generators.
To optimize Bluetooth range, avoid close signal interference or signal-blocking material like mounting beneath or inside metal. Always make sure that the Kin tag is mounted with the QR-code facing outwards, and the backside (the flat side of the tag) facing the machine/metal.
See how to activate and onboard Kin tags here
💡 Tip: For diagrams and detailed instructions on installation, refer to the installation guide provided with the tag or check it on our website
💡 Tip:
Need more help?
Click on the Messenger icon in the lower left corner to get in touch with Customer Support.